Golf Rack For Motorcycle Does Any One Know The Procedure To Change A Steering Rack On A Golf Gti 2.0 16v 1996 Model?

Does any one know the procedure to change a steering rack on a golf gti 2.0 16v 1996 model? - golf rack for motorcycle

Press the track bar arm direction. Loosen the nuts on the axle, pull the vacuum hose to direct the power of the pump and the hydraulic oil leak. An engine mount and gearbox with support from the support of VW. You can adapt to a porter, if not the engine and gearbox with a carriage supports the fact that no damage to the use of wood to block oil pan IE. Remove rack and pinion bellows. Remove the screws from the rack. Delete this frame as the mounting bolts under the engine, gearbox and chassis assembly Sub. Tighten the two separated halves of the axis direction if they do. Disconnect the hoses from the direction and with a zippered plastic bag and tape sealed. Loosen the nut address. Remove rack on the back of the vehicle.
Install in reverse order. When lifting the engine, transmission and sub-frame assembly instructions for the lower half of the steering column in the upper half, while checking the position of the steering wheel. Coat of Bellow throw with the lubricant before it into the address field. Be sure to torque all bolts properly
It has the front wheel alignment checked and adjusted if necessary.